Pureco gloss sealer 600ml (discontinued)

Pureco matte sealer

Matte sealer is ultra flat and easy to use, giving an invisible finish over your paint finish.

This sealer can be tinted using both ranges of our paint.

You can also use waxes over this product if you choose.

Apply with brush or wipe on with a damp lint free cloth. 

Perfect to use under rub on transfers, can be used as a image transfer medium as well.

600ml will cover 6–8 square meters depending on application technique and surface roughness.

Water clean up

Use 1 coat only on dark colours as the mattifying agent will give it a cloudy appearance.

Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 4 Hours.

Satin sealer

Is designed for use over any of Pureco paints, sealing transfers and decoupage.

The sheen satin. It is easy clean, self levels for use on interiors and water clean up. It can be tinted with any of Pureco paint colours and used as a glaze. Will repel staining and is a fantastic product for so many uses.Stir with a broad stirrer, ensure your surface is dry, clean & dust free.Always do a test patch to see if this product is right for your project.Apply a single coat with a broad brush, sprayed or if easier it can be applied with a lint free damp cloth or sponge.

No more than 2 coats should be required.

Allow your first coat to dry thoroughly before applying your next coat.

Coverage is 13 square metres per litre, depending on application technique and surface roughness.Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).

Pureco eggshell sealer (semi gloss,exterior grade)

Is designed for use over any of our paints, sealing transfers and decoupage.

The sheen is between a satin and gloss sheen.

It is easy clean, self levels for use on interiors, exteriors and water clean up.

It can be tinted with any of our paint colours and used as a glaze. 

Will repel staining and is a fantastic product for so many uses.

Stir with a broad stirrer, ensure your surface is dry, clean & dust free.

Always do a test patch to see if this product is right for your project.

Apply a single coat with a broad brush, sprayed or if easier it can be applied with a lint free damp cloth or sponge.

No more than 2 coats should be required.

Allow your first coat to dry thoroughly before applying your next coat.

Coverage is 13 square metres per litre, depending on application technique and surface roughness.

Drying Times Touch: 30 Minutes(at 25 °C) ; Recoat: 4 Hours(at 25 °C).

Can be used for gluing down & sealing wallpaper.

This product should not be used if air temperature is below 10 degress or above 35 degrees.

Do not apply in direct sunlight.

Use in a well ventilated area.

Water clean up. 100% washable.

Pureco gloss sealer (exterior grade)

Gloss sealer is highest sheen level sealer.

Stir contents thoroughly before and during use with a broad, flat stirrer, using an upward action.

Can be brushed, rollered or wiped on. Gloss sealer is quite a sticky consistency and water can be added to heplp application.

If spraying add up to 10% water.

600ml will cover 10-12 square metres

Apply 2 coats as required

Drying Times (at 25 °C): Touch: (at 25 °C): Touch: 40 Minutes; Recoat: 3 Hours.

Water clean up

Exterior/Interior use

This product should not be used if air temperature is below 10 degress or above 35 degrees.

Do not apply in direct sunlight.

Use in a well ventilated area.

Water clean up. 100% washable.